Epoxy resin plays a vital role in both fixing and retrofitting architectural studs into the built environment due to its long-lasting and near-permanent bonding strength. Retrofitting involves installing studs onto pre-established surfaces such as walls, monuments, and pavements. This method enhances accessibility and safety while offering multiple performance benefits.

Key Benefits

• Ultra-strong bonding: Firmly holds studs under heavy traffic conditions
• Fast setting: Minimizes road closure time
• Weather & water resistant: Performs reliably in rain, heat, and cold
• High load bearing: Suitable for highways and city roads
• Excellent adhesion: Bonds effectively to concrete, asphalt, and bitumen surfaces

Directions for Use

---

Preparation & Cleaning

• The road surface must be clean and completely dry before application begins.
• Remove all debris and sweep away dirt, dust, and contaminants that may affect the adhesion of STUDBINDA® .
• Epoxy Adhesive to the road surface (A light wire brush is recommended). Any traces of oil or grease must first be removed using Hydrosolve Degreaser then rinsed with water and allowed to dry.

Application

• Mix the contents of each container (Component A and Component B) separately.
• Combine both components and stir thoroughly for at least 1 minute to form a homogeneous mixture.
• This product has a short pot life, so mixing should be done quickly yet thoroughly to ensure proper consistency and performance.

Shelf Life

12 months when stored in a cool, dry, and covered place.